📍 Schofields NSW 2762 — Sydney-wide delivery
Home › Electric Pallet Jack Hire › Fleet Hire

Electric Pallet Jack Fleet Hire

Five units or a hundred. Long-term rental for distribution centres, 3PLs and manufacturers, or a short burst of extra machines to get through a peak — one rate per unit per month, service included, across Sydney, Newcastle and Wollongong.

Also searched as pallet truck fleet hire, bulk pallet jack hire, long-term pallet jack rental, contract hire, warehouse equipment fleet hire or materials handling rental.

HELI CBD-Li3 lithium walkie electric pallet jack, 550mm forks
Walkie · 550mm
HELI CBD15 and CBD20 electric pallet truck, 685mm forks
Walkie · 685mm
JIALIFT SL20GA-LI stand-on ride-on electric pallet jack
Stand-on ride-on
JIALIFT A30 rough terrain electric pallet jack
Rough terrain
5–100Units per contract
18 YearsIn materials handling hire
ServiceIncluded in the monthly rate
Syd · Newc · WgongDelivered and serviced
Fleet & Contract Hire

One Rate Per Unit. No Capex. No Surprises.

Buying thirty pallet jacks ties up capital, puts maintenance on your team and leaves you with ageing machines in three years. Fleet hire turns the lot into one predictable monthly cost — and when the contract changes, the fleet changes with it.

One monthly rate per unitMachine, scheduled servicing and breakdown response in the one line on the invoice. Budget it once and forget it.
Scale up and downAdd units when a new contract lands, hand them back when it ends. You're not stuck with machines you've stopped using.
No maintenance headcountWe service them. Your team moves pallets instead of chasing batteries, chargers and repair quotes.
No end-of-life riskNo resale, no write-down, no tired machines nobody wants to drive. They go back and newer ones come in.
Backup unitsA machine down is a pick line down. We get to it as fast as we can, and where it can't be fixed on the spot we look at swapping it out.
Try before you commitTake one unit for a week on a short hire. Put it in front of the people who'll actually drive it, then decide.
Who We Supply

Built For Sites That Move Pallets All Day

If your floor runs on pallets, the jacks are the machines nobody notices until one stops.

3PL & contract logistics

Fleets that have to flex with the contract. New client wins, site ramp-ups, machines that follow the work instead of sitting idle.

Distribution centres & fulfilment

Pick lines, replen and dispatch. Walkie units for aisle work and ride-ons for long runs across a big floor.

Food, beverage & FMCG

High pallet turnover, tight dock schedules and a fleet that has to be available every shift, not most shifts.

Cold store & chilled

Tell us the temperature the machines will live in and we'll be straight with you about what suits and what doesn't.

Manufacturing & production

Raw material in, finished goods out, and machines sized for the loads your lines actually produce.

Retail DCs & building supplies

Mixed pallet types, trade counters and yards — including rough terrain units that work outside on gravel and uneven ground.

Events, expo & venues

Bump-in and bump-out, where you need a dozen machines for three weeks and none for the rest of the year.

Peak season & stocktake

Christmas ramp, EOFY, a new site fit-out or a run of machines off the road. Short-term hire that doesn't need a contract.

How It Works

From First Call To Machines On The Floor

1
Tell us the jobSite, shifts, pallet types, load weights, travel distances and how many units you think you need.
2
Site walkWe come to you. Aisle widths, dock heights, floor surface, charging points and where the machines will live.
3
Model mixRarely is one model right for a whole site. We put up a mix — fork widths, capacities, walkie and ride-on — and tell you why.
4
Trial unitOne machine, one week, on your floor with your operators. Cheapest way to find out before you sign.
5
Rate and termOne monthly rate per unit, the term you want, and exactly what's included in writing.
6
Staged deliveryAll at once or in batches as the site comes online — whatever keeps your operation running.
The Fleet Mix

Which Models Go Into A Fleet

Most sites end up with two or three of these, not one. These are the machines we put into fleets — the right split depends on your pallets, your aisles and how far the machines travel.

HELI CBD-Li3 lithium walkie electric pallet jack, 550mm forks — fleet hire Sydney
Walkie, 550mm forksMixed pallet sites. Narrow forks take both Euro and Australian/CHEP pallets, so one machine covers the lot.1500–2000kg
HELI CBD15 and CBD20 walkie electric pallet truck, 685mm forks — fleet hire Sydney
Walkie, 685mm forksHeavy Australian/CHEP pallets. Wider forks spread the load for a steadier lift.1500–2000kg
JIALIFT SL20GA-LI stand-on ride-on electric pallet jack — fleet hire Sydney
Stand-on ride-onLong runs across a big floor — dock to pick face and back. Operators cover far more ground a shift.2000kg
JIALIFT A30 rough terrain electric pallet jack — fleet hire Sydney
Rough terrainYards, gravel, trade counters and container work outside.Up to 3000kg
JIALIFT A30-685x2000 long fork electric pallet jack — fleet hire Sydney
Long-fork modelsTwo pallets at a time, or long stock that overhangs a standard fork.Forks to 2000mm
JIALIFT SL20L3E/550 walkie electric pallet truck — fleet hire Sydney
Narrow-aisle walkieContainers, tight aisles, passenger lifts and small docks.2000kg, 550mm forks
TypeWhere it earns its keepTypical spec
Walkie, 550mm forksMixed pallet sites. Narrow forks take both Euro and Australian/CHEP pallets, so one machine covers everything.1500–2000kg, walk-behind, lithium or lead-acid
Walkie, 685mm forksHeavy Australian/CHEP pallets. Wider forks spread the load for a steadier lift.1500–2000kg, walk-behind
Stand-on ride-onLong runs across a big floor — dock to pick face, or one end of a DC to the other. Operators cover far more ground per shift.2000kg, stand-on platform
Rough terrainYards, gravel, trade counters, container unloading outside.Up to 3000kg, all-terrain wheels
Long-fork modelsTwo pallets at a time, or long stock that overhangs a standard fork.Forks to 2000mm

See every model and its specs →

What You Get

What's In The Monthly Rate

The machineDelivered to your dock ready to work, with its charger, operator's manual and the manufacturer's brochure.
Scheduled servicingBooked around your shifts where we can. We keep the service records and send you a copy.
Breakdown responseYou ring, you get a person who knows your site. Seven days, no call centre.
Familiarisation on deliveryWe run your crew through the machine and the manual when it lands, so nobody is guessing on day one.
PaperworkOperator's manual, brochure and service history, so your records are complete.
One point of contactYou deal with the owner, not an account manager who changes every six months.

Damage, lost chargers and consumables are chargeable, and anything outside normal wear is quoted before work starts. Rates are quoted ex GST.

Working Well Together

How We Keep A Fleet Running

The sites that get the most out of a hire fleet all do the same few simple things. None of it is hard, and it keeps the machines available and the costs down for everyone.

Operators who know the machineWe run your crew through it on delivery, and the operator's manual stays with the machine for anyone who joins later.
A quick look before each shiftHalf a minute over the forks, wheels, controls and battery catches most things while they're still small.
Charging as the manual suggestsBatteries last longer and machines stay available when they're charged the way they're meant to be. We'll set that up with you on day one.
The right machine for the loadWorking inside the rated capacity and load centre, on the surfaces the machine suits. If the work changes, tell us and we'll look at the mix again.
A quick call if something changesA new noise, a knock on a fork, a wheel looking tired — one phone call and we can usually sort it before it costs anyone a day.
Somewhere for them to liveA spot out of the weather with the charger nearby keeps the fleet in good shape and makes the morning start easier.

Sydney, Newcastle & Wollongong

We deliver and service fleets right across Greater Sydney — Eastern Creek, Erskine Park, Huntingwood, Wetherill Park, Smithfield, Silverwater, Moorebank, Prestons, Ingleburn, Kemps Creek, Marsden Park, Rouse Hill, Seven Hills, Chullora, Port Botany and Mascot — and run fleets up the M1 to Newcastle and the Hunter, and down the M1 to Wollongong, Unanderra and Port Kembla. If your sites are spread across all three, that's one contract and one phone number, not three.

Fleet Hire Questions

Answered Straight

Can you really supply 50 or 100 electric pallet jacks?

Yes — that's what this page is for. Big numbers come together from our own fleet, from stock we bring in against a signed contract, and from the supplier and hire network we've built over 18 years. What we won't do is promise you machines on a date we can't hit. Tell us the number and the date you need them, and we'll tell you straight away what we can land by then and what has a lead time.

How quickly can a fleet be on site?

Depends on the number and the models. A handful of units is usually days. Fifty or a hundred of a particular spec means lead time, and we'll give you a date you can plan around instead of a date that sounds good. Many sites start with a first batch while the rest is on the water, so the floor keeps moving.

What does fleet hire cost per unit?

One rate per unit per month, which drops as the number of units and the length of the term go up. Because the mix matters — fork widths, capacities, ride-on versus walkie, how hard the site works them — we price it after a site walk rather than guessing on a web page. Ring 0450 133 133 and we'll have a number to you quickly.

What's the minimum term?

For fleet rates, 12 months is the usual starting point, and 24 or 36 months brings the monthly rate down further. If you only need machines for a peak, a fit-out or a stocktake, that's short-term hire instead — no contract, just tell us the dates.

Can we hire extra machines just for the Christmas peak?

Yes, and plenty of sites do exactly that: a core fleet on long-term hire and extra units for the ramp. Book the peak units early — every warehouse in Sydney wants them in the same eight weeks.

Can we trial one before committing to a fleet?

Yes. Take a single unit on a short hire, put it in front of the operators who'll actually drive it, and see how it handles your pallets and your aisles. It's the cheapest way to avoid ordering thirty of the wrong thing.

What happens when a machine breaks down?

You ring us, seven days, and you get a person who knows your site. We'll get to it as quickly as we can and tell you honestly when that will be. Where it can be fixed on the spot, it is; where it can't, we look at swapping the machine out so the line keeps moving. That response is part of the monthly rate, not an extra.

Who does the servicing?

We do, on a schedule, booked around your shifts where we can. We keep the service records and send you a copy. Your team doesn't chase repair quotes — though the day-to-day side, charging and the pre-start check, stays with your operators.

Do you deliver to Newcastle and Wollongong?

Yes. We service fleets across Greater Sydney, up to Newcastle and the Hunter, and down to Wollongong and Port Kembla. Sites spread across all three is one contract and one number to call.

Can we mix models across the fleet?

You should. Narrow 550mm forks handle both Euro and Australian/CHEP pallets, wider 685mm forks suit heavy CHEP loads, ride-ons pay for themselves on long runs and rough terrain units work outside. We'll put up a mix after the site walk and explain why each one's there.

Can we add units mid-contract?

Yes. New client win, extra shift, a second site — tell us and we'll add units on the same terms. Handing units back mid-term depends on what we agreed, and we'll spell that out in the contract rather than leave it vague.

Do you fill in supplier onboarding forms?

Yes. Most warehouses have a form or a portal before a new supplier can deliver on site. Send it through and we'll fill it in and return it with the documents you ask for, including service history for the machines. If your team needs anything else in writing, just say what it is.

Do operators need a licence for electric pallet jacks?

Walk-behind electric pallet jacks don't need a high risk work licence. Ride-on models have their own rules depending on how they're configured, and sites usually want documented familiarisation either way. We go through it with your crew when the machines land, and you should always check your own site's requirements.

What about charging and batteries across a big fleet?

Worth planning before the machines land, not after. On the site walk we look at where the chargers go, how many power points you have and whether lithium or lead-acid suits your shift pattern — a site running two shifts needs a different answer to one running days only.

Can you supply to cold storage or chilled sites?

Tell us the temperature the machines will live in. Some models handle chilled work, freezer work is harder on batteries and electronics, and we'd rather tell you that upfront than put the wrong machine in and have it fail on you.

What's the difference between fleet hire and just hiring a few machines?

Volume and term. A few machines for a few weeks is ordinary hire — ring and we'll deliver. Fleet hire is five units or more on an agreed term, which brings the rate down, brings scheduled servicing in and brings replacement machines with it.

Can we buy at the end instead of handing them back?

Ask us when we're putting the deal together. It changes the monthly rate, so it's a decision to make at the start rather than a surprise at the end.

Next Step

Book A Site Walk

No obligation, no sales team. We look at your floor, your pallets and your shifts, and come back with a model mix and a rate per unit. If hiring isn't the right answer for your site, we'll say so.

📞 0450 133 133 Email sales@tradieshire.com.au Request a Fleet Quote

Need gear on site tomorrow?

Call now for a fast quote — we answer, 7 days.

📞 0450 133 133 Get a Quote
📞Call Now 💬WhatsApp ✉️Get a Quote