Material Lift Hire Sydney

Material lifts handle ducting, air-conditioning units, steel beams, timber, glass, cabling drums and other heavy components — lifting up to 454kg depending on the model, with lift heights up to 8 metres.

The GL range is the lightest and most portable (up to 4.2m). The SLA range offers higher capacities up to 454kg. The SLC contractor range is built for constant site use. Toro counterweight lifts allow lifting close to walls without front legs.

Yes — all our material lifts are designed for one-person setup and operation. They winch loads up manually, need no power, and most fit in a ute or van.

Yes, we deliver and pick up material lifts anywhere in Sydney and across NSW. Call 0450 133 133 for same-day or next-day availability.

Genie Superlift is one brand of material lift — we hire the SLA range, which is exactly that. The same class of machine gets called a material lift, duct lift, Genie lift, material hoist, load lifter, panel lift, counterweight lift, contractor lift and portable lift, and trades searching for an aircon lift, HVAC lift, drywall lift, plasterboard lift or truss lift are after the same thing. It raises materials, not people. Tell us the weight and the height and we'll name the model.

Hire rates depend on the machine and how long you need it — weekly rates work out a lot cheaper per day than a one-day hire, and we quote delivery separately based on your suburb. Call 0450 133 133 or email sales@tradieshire.com.au with the job and we'll give you a price on the spot.

No. A material lift raises materials, not people, so it isn't an elevating work platform and no High Risk Work Licence applies. You still need to be trained and competent, keep people clear of the raised load, and use the outriggers and brakes as the manufacturer intends.

Yes — most of the range breaks down or folds for transport and will go in a large van or on a ute tray. That's the main reason trades hire them instead of trying to book a crane or a telehandler for a couple of lifts. Tell us your vehicle and we'll confirm which model suits.

That's one of the most common uses. HVAC crews use material lifts every day for fan coil units, split system heads, ducting, VRF units and roof plant, along with steel beams, timber trusses, signage and shop fittings. Give us the weight and the lift height and we'll match the model.

They're all the same class of machine. Material lift, duct lift, Genie lift, Genie Superlift, material hoist and load lifter are names people use for the same thing — a portable winch or hydraulic mast that raises materials to height. We hire Genie SLC, SLA and GL models plus Toro counterweight lifts.

Yes. Single-person setup is the whole point of these machines — you wheel it in, lock the brakes, deploy the outriggers, load it and wind or drive it up. No second set of hands, no crane, no scaffold.

Yes — we deliver and pick up right across Sydney, including Parramatta, Blacktown, Penrith, Liverpool, Bankstown, the Hills District, the Inner West, North Sydney, the Northern Beaches and the Sutherland Shire, plus Newcastle, the Central Coast and Wollongong. We're based in Schofields in western Sydney. Same-day and next-day delivery is usually available — call 0450 133 133 to check.

Up to 8m lift height and up to 454kg depending on the model — the taller models trade capacity for reach, so the right choice depends on your combination of weight and height. Tell us both and we'll pick the machine.